Nitrox Made Easy Logo 

Home Methods Nitrox Stik Nitrox Controller Safety Valve Oxygen Analyzer Customer Systems FAQ

Oxygen Analyzer                

 

 


Nitrox/Oxygen Analyzer

Nitrox Oxygen Analyzer

    Our Nitrox/Oxygen Analyzer has a number of great features:

  •  Water/Splash Resistant (no analyzer is water proof, in spite of what some salesman might tell you).
  •  Easier to use and calibrate than most competitors' oxygen analyzers due to the calibration circuit design.
  •  Analyzer has backlight feature.  3 Position power switch:  Up is On; Middle position is Off ; and Down position is On with Backlight.
  •  BC flowrate adapter plugs into standard low pressure inflator BC fitting.  This makes it very easy to get a stable flowrate of gas to your oxygen analyzer (this is the preferred/most accurate method of calibrating and sampling).   The BC sample adapter and 2 feet of 3/16" clear tubing is included with the purchase of every Nitrox/Oxygen analyzer.
  •  Can be used to sample directly from a SCUBA tank.  Crack the valve on tank to establish a small flowrate, press the analyzer up to tank to sample (calibrated orifice controls rate at which gas enters sample section).  Works with both Yoke and DIN style tank valves.
  •  Easy to surface mount.  Analyzer Enclosure has mounting holes that are outside of the gasket seal.  Mounting hole spacing is also indicated on the back of the enclosure in both inches and centimeters.
  • Available in both Right and Left handed versions.  Left Handed version swaps the position of the on/off switch and the calibration knob, making it much easier for the left handed to use.  Showing the south paws some respect...
  •  4-5 year expected lifespan of sensor.  Sensor has two year warranty.   Lower overall cost of ownership. 
  •  2 year limited warranty against workmanship and material defects.
  •  Includes Battery.  Oxygen Analyzer ships fully assembled and ready to use.

Proudly made in the USA.

Sampling with BC Sample Adapter

Oxygen Analyzer Sampling with BC Flow Adapter

 

  Sampling Directly From Tank

Oxygen Analyzer Sampling Directly from Nitrox Tank

BC Sample Adapter showing flowrate
 (2.7 LPM @ 140 psi intermediate pressure)

 

  Analyzer with Backlight (Switch in Down Position)

Oxygen Analyzer with Backlight

Left and Right Handed Versions:
Analyzer comes with BC Sample
Adapter and 2 feet of 3/16" tubing.

Complete Left Handed and Right Handed Oxygen Analyzers

  Mounting Holes on Back of Enclosure

Mounting holes on back of Oxygen Analyzer Enclosure

DEMA SPECIAL:

The Rubber Duckie Designs Oxygen analyzer is available for purchase for $275.  Shipping anywhere within the United States costs an additional $10.  For shipping to other countries, please send us an email with your address and we will provide you a quote for the most cost effective shipping method (usually this is US Postal Service).

Call Derek at (808) 392-8252 or email at Derek@NitroxMadeEasy.comfor more information.

Official PayPal Seal

Quick, safe and secure transactions using PayPal.  All items are shipped via US Postal Service.
Left and Right Handed Oxygen Analyzers Right Handed Version

Left Handed Version

 

 


External Sensor Type Nitrox/Oxygen Analyzer

We also carry a Nitrox/Oxygen analyzer with an external Oxygen Sensor.  Perfect for use with your Nitrox Stik.

  •  Water/Splash Resistant (no analyzer is water proof, in spite of what some salesman might tell you).
  •  Easier to use and calibrate than most competitors' oxygen analyzers due to the calibration circuit design.
  •  Analyzer has backlight feature.  3 Position power switch:  Up is On; Middle position is Off ; and Down position is On with Backlight.
  • High quality shielded/armored cable with screw-on connection to oxygen sensor.  Sensor cable will not inadvertently come loose.
  •  Easy to surface mount.  Analyzer Enclosure has mounting holes that are outside of the gasket seal.  Mounting hole spacing is also indicated on the back of the enclosure in both inches and centimeters.
  • Available in both Right and Left handed versions.  Left Handed version swaps the position of the on/off switch and the calibration knob, making it much easier for the left handed to use.  Showing the south paws some respect...
  •  4-5 year expected lifespan of sensor.  Sensor has two year warranty.   Lower overall cost of ownership. 
  •  2 year limited warranty against workmanship and material defects.
  •  Includes Battery.  Oxygen Analyzer ships fully assembled and ready to use.

Proudly made in the USA.

Analyzer with External Sensor and Six Feet of Cable. (Backlight On - Switch in Down Position)

External Sensor Oxygen Analyzer

 

 

Analyzer Easily Wall Mounts Next to your Nitrox Sik.

Oxygen Analyzer Close Up

 

Jack screws onto Oxygen Sensor, High Quality Armored/Shielded Cable Resists Damage.

Oxygen Sensor and Cable

 

Mounting Holes on Back of Enclosure make wall Mounting Easy.

Oxygen Analyzer Enclosure Backside

The Rubber Duckie Designs Oxygen analyzer is available for purchase for $275.  Shipping anywhere within the United States costs an additional $10.  For shipping to other countries, please send us an email with your address and we will provide you a quote for the most cost effective shipping method (usually this is US Postal Service).

Call Derek at (808) 392-8252 or email at Derek@NitroxMadeEasy.com for more information.

More information about the Nitrox/Oxygen Analyzer is available at www.RubberDuckieDesigns.com.        


             

Last modified: 07/23/09